Cryomec HSMP

Horizontal Sealless Motor Pump
Fives' Cryomec HSMP pump (Horizontal Sealless Motor Pump) is dedicated to small scale transfer applications.
The main advantage of this encapsulated design is the absence of seal system between the cryogenic and motor parts. The bearings are life time bearings for smooth operation, avoiding technicians’ intervention for manual regreasing
This sealless pump is mainly used in ATEX areas (explosive atmospheres), for hydrocarbon liquids like LNG or methane, high suction pressure gases like carbon dioxide and expensive liquids like pure argon.
Maximum Safety
With its high-end design, Fives' Cryomec HSMP pump - equipped with a motor - is totally encapsulated (IP6x), implying that the equipment is entirely safe when pumping hydrocarbon or dangerous liquids, such as CO.
Ultimate Reliability
Fives' Cryomec HSMP pumps are designed to be able to take over 4’000 hours of duty – 4 times higher compared with mechanical seal pumps - a key asset for the equipment's reliability and your fluid transfer’s reliability.
Optimized TCO
Due to its high-end mechanical design, the maintenance is reduced to the strict minimum as there is no seal.
Moreover, there is no seal gas requested by this pump and the number of wear parts is reduced which optimize the total cost of ownership (TCO).
Product features and advantages
- 100% capsulated pump – ZERO shaft seal – ZERO leakage
- A flow rate up to 1’500 l/min (single stage version only)
- Fives offers this single stage pump with differential head up to 120 m
- Possibility to retrofit mechanical seal pump installation without any modification
- A specific design allowing constant cold standby
- Reduced NPSH brought by an inducer and a patented Supercharger technology (for single stage pumps).
- Easy maintenance and low total cost of ownership
- A maximum safety level - recommended for explosive atmospheres area such as ATEX
- Improved technology based on our long term expertise in Sealless pump (Cryomec VSMP)
Working principles of Fives' Cryomec Horizontal Sealless Motor Pump

⇒ For recruitment-related matters (application, etc.), please do not use this form. Make your requests on this page.
In order to address your request, we need to collect the information listed in the form below
Information on data processing
As a data processor, FIVES implements personal data processing when managing your contact request. The data collected are required for this processing and are retained, unless you object, for a period of 6 months from the last contact between you and FIVES. If the information is incomplete, FIVES will not be able to respond to your contact.
The data collected are exclusively for the use of FIVES departments.
Pursuant to current legislation, you have the right to request access to data concerning you, their correction, deletion and portability, as well as a right of limitation over processing of your data.
These rights can be exercised by email to DPO@fivesgroup.com or by post to the Data Protection Officer at the following address: FIVES, 3 Rue Drouot, 75009 Paris, accompanied by a copy of an identity document.
In case of a dispute involving processing of your personal data, you have the right to make a complaint to the French Data Protection Agency (CNIL).
To find out more about our personal data protection policy click here